Vehicle: 1969 Ford Bronco

Modifications:

• 1969 Ford Bronco with stock 302 V8 factory Ford (.030 over) rebuilt engine. The 8.5 to 1 compression engine is using its original factory 2bbl Autolite carb.
•  Cast iron stock exhaust manifolds y into a Mustang 5.0 muffler and exits into a single exhaust pipe. The intake manifold has been updated with an aluminum 2 V from a 1978 ford.
•  The transmission is a NP435 adapted to the stock Dana 20 T-case. The front end is a Dana 44 with beefed axles and a locker. The rear axle is a 9" with Currie 31 spline axles and a Detroit locker. The gears are 3.50. The tires are Big O's 33x12.50 on 12" wide rims.
• The body has been lifted 1" and the suspension has been updated with a 2.5" lift with dual shocks on all corners.
• The stock power steering box is driven by a Saginaw pump.